Network Configuration; Accessing Via Web Browser - Matrix SATATYA Professional Series Installation Manual

Network Configuration

To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet with
your PC. Then install the software to configure the IP address.
Steps to get the IP address,
•
Once the camera is connected to the network, it will automatically
be assigned a dynamic IP address by the DHCP server. You can
view the assigned IP address through any IP scanner utility.
•
If DHCP server is unavailable or is not able to provide an IP address
then 192.168.1.126 will be set as default IP address.
•
You can change the IP address and subnet mask of Camera from
the Basic Settings page of camera.
21

Accessing via Web Browser

The IP cameras are supported by Microsoft Windows Operating
System.
In Internet Explorer you can access the camera with Matrix
ActiveX plugin. In other browsers you need to install
Quicktime or VLC plugin.
Steps,
•
Run the web browser as administrator.
•
In the browser address bar, type the IP address of the camera
e.g., 192.168.1.126 and press the Enter key to open the login
interface.
192.168.1.126 192.168.1.124
22