Care And Maintenance; Troubleshooting; Warranty - Project Source FP4AF261CP Manual

CARE AND MAINTENANCE

• Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as
these will dull the finish and void your warranty.

TROUBLESHOOTING

PROBLEM
Leak from under handle.
Aerator has an
inconsistent water flow
pattern.
Water leaks from aerator.
The hose does not
retract.

WARRANTY

The manufacturer warrants this faucet to be free from defects in workmanship and material present at
time of shipment from the factory for a limited lifetime from the date of purchase. This warranty applies
only to the original purchaser. The manufacturer agrees to correct such defects at no charge or, at our
option, replace the faucet with a comparable or superior model. To obtain warranty service, call our
customer service department at 1-866-389-8827 for return authorization and shipping instructions.
You may be required to present a copy of your sales receipt as proof of purchase. All cost of removal
and reinstallation are the expressed responsibility of the purchaser. Any damage to the faucet by
accident, misuse or improper installation, or by affixing accessories not produced by the manufacturer,
are the purchaser's responsibility. The manufacturer assumes no responsibility whatsoever for faucet
installation during the warranty period. There is no further expressed warranty. The manufacturer
disclaims any and all implied warranties. The manufacturer shall not be liable for incidental,
consequential or special damages arising at or in connection with product use or performance except
as may otherwise be accorded by law. This warranty gives you specific legal rights, and you may also
have other rights which vary from province by province. This warranty supersedes all prior warranties.
POSSIBLE CAUSE
Retainer nut has come loose. O-ring
on cartridge is dirty or damaged.
Aerator is dirty or misfitted.
Cartridge needs to be replaced.
The weight is not installed in the
appropriate position.
CORRECTIVE ACTION
Tighten the retainer nut. Clean
or replace O-ring.
Remove aerator, check for
debris in the aerator screens,
and confirm the rubber washer
is properly installed.
Remove handle assembly, trim
cap and locking nut. Take out
existing cartridge and discard.
Replace with new cartridge and
reassemble.
Reinstall or readjust the weight.
11