Hyundai 2007 Tiburon Owner's Manual page 213

G110D01GK-AAT
Checking the automatic transaxle fluid
level
2.0L 2.7L
The automatic transaxle fluid level should be
checked regularly.
Keep the vehicle on level ground with the park-
ing brake applied and check the fluid level
according to the following procedure.
1. Place the shift lever in N(neutral) position
and confirm the engine is running at idle
speed.
2. After the transaxle is warmed up sufficiently
[fluid temperature 70~80°C (158~176°F)],
for example by 10 minutes usual driving,
move the shift lever through all positions then
place the shift lever in N(neutral) or P(park)
position.
Fluid level should be within this range
3. Confirm if the fluid level is in the "HOT" range
on the level gauge. If the fluid level is lower,
add the specified fluid from the fill hole. If the
HGK5007
fluid level is higher, drain the fluid from the
drain hole.
4. If the fluid level is checked in cold
condition[fluid temperature 20~30°C
(68~86°F)], add the fluid to the "COLD" line
and then recheck the fluid level according to
the above step 2.
DO-IT-YOURSELF MAINTENANCE
!
WARNING:
The cooling fan is controlled by engine
coolant temperature and may sometimes
operate even when the engine is not run-
ning. Use extreme caution when working
near the blades of the cooling fan, so that
you are not injured by a rotating fan blade.
As the engine coolant temperature de-
creases, the fan will automatically shut off.
This is a normal condition.
HGK5008
6
13