Checking Drive Belts - Hyundai 2004 Santa Fe Owner's Manual

6
DO-IT-YOURSELF MAINTENANCE
CHECKING BRAKE
2 0
CLEARANCE
G180A01A-AAT
You need a helper to check the brake pedal
clearance. With the engine running, have your
helper press down on the brake pedal several
times and then hold it down with a force of about
110 lbs (50 kg, 490 N). The brake pedal clear-
ance is the distance from the top surface of the
brake pedal to the asphalt sheeting under the
floor mat.
If the brake pedal clearance is not within the
limits specified in the illustration, have it in-
spected by your Hyundai dealer and adjusted
or repaired if necessary.
PEDAL

CHECKING DRIVE BELTS

G190A01A-AAT
Power steering
Auto tensioner
2.95 in. (75 mm)
Generator
Eng.pulley
G180A01L
3.5 V6
Power steering pulley
Crank shaft apulley
2.7 V6 2.4 DOHC
Power steering
Eng.coolant
0.30~0.48 in. 0.24~0.35 in.
Generator
0.315 in.
COMP
COMP
Eng.pulley
HSM396
Generator
A/C pulley
G140D02L
Drive belts should be checked periodically for
proper tension and adjusted if necessary. At the
same time, belts should be examined for cracks,
wear, fraying or other evidence of deterioration
and replaced if necessary.
Belt routing should also be checked to be sure
there is no interference between the belts and
other parts of the engine. After a belt is replaced,
the new belt should be adjusted again after two
or three weeks to eliminate slack resulting from
initial stretching after use.