Safety And Instructional Decals - Exmark ULTRAVAC 126-6122 Operator's Manual

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
106-5517
1. Warning—do not touch the hot surface.
112-9028
1. Warning—stay away from moving parts; keep all guards
in place.
126-4659
1. Warning-Hot pulley; allow to cool.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
decal106-5517
decal112-9028
1. Warning-Read the Operator's manual for correct
quantity of counterbalance weight(s).
2. Loss of traction and steering or reduced stability
hazard-UltraVac counterbalance weight(s) installed
without UltraVac may cause loss of traction and
steering control. UltraVac installed without UltraVac
counterbalance weight(s) will cause reduced stability.
Install weight(s) only when UltraVac is installed.
decal126-4659
1. Impeller/Rotating Blades hazard-Keep hands away
from moving parts. Keep all safety devices in place
and working. Do Not reach into blower unless rotation
indicator has stopped.
7
Safety
126-4662
126-4853
decal126-4662
decal126-4853