Exmark ULTRAVAC 126-6122 Operator's Manual page 6

Safety
DANGER
There are rotating blades in the blower and
under the mower deck. Blade contact can
cause serious operator or bystander injury or
even death.
• Do Not reach into blower unless rotation
indicator has stopped. Disengage PTO,
stop engine, remove key, wait for all
moving parts to stop. Engage parking
brake.
• Never operate mower unless discharge
deflector, entire grass collection system,
or mulch kit is installed.
• Park machine on level ground. Stop engine, wait
for all moving parts to stop, remove key and
engage parking brake:
– Before checking, cleaning or working on the
mower.
– After striking a foreign object or abnormal
vibration occurs (inspect the mower for
damage and make repairs before restarting
and operating the mower).
– Before clearing blockages.
– Whenever you leave the mower.
WARNING
Hands, feet, hair, clothing, or accessories can
become entangled in rotating parts. Contact
with the rotating parts can cause traumatic
amputation or severe lacerations.
• Do Not operate the machine without
guards, shields, and safety devices in place
and working properly.
• Keep hands, feet, hair, jewelry, or clothing
away from rotating parts.
• Stop the blades, slow down, and use caution
when crossing surfaces other than grass and when
transporting the mower to and from the area to
be mowed.
• Be aware of the mower discharge path and direct
discharge away from others.
Maintenance and Storage
• Disengage PTO, set parking brake, stop engine
and remove key or disconnect spark plug wire.
Wait for all movement to stop before adjusting,
cleaning or repairing.
• Use care when checking blades. Wrap the blade(s)
or wear gloves, and use caution when servicing
them. Only replace damaged blades. Never
straighten or weld them.
• Keep all guards, shields and all safety devices in
place and in safe working condition.
• Check all bolts frequently to maintain proper
tightness.
• Frequently check for worn or deteriorating
components that could create a hazard.
WARNING
Removal or modification of original equipment,
parts and/or accessories may alter the warranty,
controllability, and safety of the machine.
Unauthorized modifications to the original
equipment or failure to use original Exmark
parts could lead to serious injury or death.
Unauthorized changes to the machine, engine,
fuel or venting system, may violate applicable
safety standards such as: ANSI, OSHA and
NFPA and/or government regulations such as
EPA and CARB.
6