Important Safety Information; Safety At All Times; Look For The Safety Alert Symbol - Titan 125FLAILSHFT Operator's Manual

IMPORTANT NOTE BEFORE USE
ADD SAE 90 GEAR OIL. DO NOT OVERFLOW. SEE PAGE 17.
•
Ensure roller weldment is adjusted to proper setting before first use.
•
Do not engage PTO while adjusting the offset of the mower.
•

IMPORTANT SAFETY INFORMATION

THESE ARE STANDARD PRACTICES THAT MAY NOT APPLY TO THE PRODUCTS

SAFETY AT ALL TIMES

Thoroughly read and understand the instructions given in this manual before operation. Refer
to the "Safety Label" section, read all instructions noted on them. Do not allow anyone to
operate this equipment who has not thoroughly read and comprehended this manual. Do not
allow anyone who has not adequately trained in the safe operation of the equipment.
The operator should be familiar with all functions of the unit.
•
Operate implement from the driver's seat only.
•
Make sure all guards and shields are in place and secured before operating the tool.
•
Do not leave a tractor or implement unattended with the engine running.
•
Dismounting from a moving tractor could cause severe injury or death.
•
Do not allow anyone to stand between tractor and implement while backing up to
•
implement.
Keep hands, feet, and clothing away from power-driven parts.
•
Wear snug-fitting clothing to avoid entanglement with moving parts.
•
Watch out for wires, trees, etc., when raising implements. Make sure all persons are clear
•
of the working area.
Turning the tractor too tight may cause implement to ride upon wheels. This activity could
•
result in injury or equipment damage.
• Do not carry passengers on the tool at any time.

LOOK FOR THE SAFETY ALERT SYMBOL

The SAFETY ALERT SYMBOL indicates a potential hazard to personal safety, and individuals
must take safety precautions. When you see this symbol, be alert and carefully read the
message that follows it. In addition to the design and configuration of equipment, hazard
control and accident prevention depend on the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage.
DESCRIBED IN THIS MANUAL.
2