Tractor Hook-Up; Tractor Shut Down Procedure - Titan 125FLAILSHFT Operator's Manual

TRACTOR HOOK-UP

1. Be certain that the tractor drawbar will not interfere. Move drawbar ahead or remove if
required. The drawbar should also be checked for clearance when the unit is raising for
the first time.
2. Align lower link arms of the tractor to hitch clevises on the mower. Insert lower hitch pins
into lower ball swivels and attach link pins.
3. Attach tractor top link to upper floating hitch on mower with pin supplied. Secure with
lock pin.
4. Adjust tractor top link in or out to place upper hitch pin vertically above or slightly behind
lower hitch pins to allow mower flotation. The mower should be running with the back 15
degrees lower than the front.

TRACTOR SHUT DOWN PROCEDURE

It is essential that the tractor be shut down as noted below before making inspection,
maintenance and /or repairs to the tractor and/or mower.
1. Park tractor on a level ground. Don't Park the implement on a steep incline.
2. Place tractor in park and set park brake.
3. Disengaged PTO if operating.
4. Shut engine off and remove key.
5. Wait for PTO shaft to stop completely before disconnect tractor.
Figure 1-11: Tractor Hook-up
12