Selecting The Room; Adjusting The Washing Machine Feet - Hisense HWGA9014 User's Operation Manual

SELECTING THE ROOM

It is recommended to place the washing machine on a firm solid base such as a concrete floor if
possible. This will help in reducing noise and vibration that are normal for high speed spin cycles. It
should be clean and dry; otherwise, the washing machine may slide. Also, clean the bottom surface
of adjustable feet.
The washing machine must stand level and stable on a solid base.

ADJUSTING THE WASHING MACHINE FEET

Use a water scale and spanner No. 32 (for feet) and 17 (for the nut).
Incorrect levelling of the washing machine with the adjustable legs may cause vibration,
appliance sliding across the room, and loud operation. Incorrect levelling of the washing machine is
not subject to warranty.
Sometimes, unusual or louder noise may appear during appliance operation; these are mostly
the result of improper installation.
16
1 Level the washing
machine in
longitudinal and
traverse direction by
rotating the adjustable
feet.
2 After adjusting
the height of the
feet, firmly tighten the
jam nuts (counter nuts)
using a spanner No
17, by turning them
towards the bottom of
the washing machine
(see figure).