Step 6: Starting The Washing Programme - Hisense HWGA9014 User's Operation Manual

STEP 6: STARTING THE WASHING PROGRAMME

Press the (3) START/PAUSE button.
3
Selected WASHING MODE, TEMP. (WASHING TEMPERATURE), SPIN (SPINNING RATE/
DRAIN/PUMP STOP) and TIME REMAINING TO THE END OF PROGRAMME or START DELAY
(if selected) are indicated on the display unit.
Symbols will be lit on the selected functions.
After pressing the (3) START/PAUSE button, the spinning rate can be adjusted (except in the case
of the Drum Clean (Self-cleaning programme) and SPIN (SPINNING RATE/DRAIN/PUMP STOP))
and child lock can be activated or deactivated, while other settings cannot be changed.
If anything is flashing on the display unit, the washing machine door is open or not closed
correctly. Close the washing machine door and press the (3) START/PAUSE again to resume the
washing programme.
43