Installation And Connection; Removing The Blocking Rods - Hisense HWGA9014 User's Operation Manual

INSTALLATION AND CONNECTION

Remove all packaging. When removing the packaging, make sure not to damage the appliance
with a sharp object.

REMOVING THE BLOCKING RODS

Before the first use of the appliance, transport rods must be removed. A blocked washing
machine may be damaged when it is switched on for the first time. Warranty shall be void in
cases of such damage!
14
1 Move the hoses
and undo the
screws on the back of
the washing machine.
Remove the two
angular pieces.
2 Slide the angular
pieces onto the
grove in the blocking
rod; before doing so,
rotate the right angular
piece to the opposite
side.
3 Use the angular
pieces to rotate
the blocking rods by
90°and pull them out.
4 Cover the two
holes through
which the blocking
rods were inserted
with plastic plugs, and
redo the screws that
you undid in step 1.
The plastic plugs are
supplied in the bag with
the washing machine
instruction manual.