Table of Contents
Advertisement
4. Loosen each wheel lug nut one-half turn
counterclockwise, but do not remove them
until the tire is raised off the ground. You
should pull up on the handle rather than
push to develop maximum force to loosen
wheel lug nuts. See Anti-Theft Wheel Lug
Nuts later in this chapter for information on
removing anti-theft lug nuts.
Removing and Replacing the Tire
1. Find the underbody notches closest to the
wheel to be removed. Center the jack
between (2) underbody notches and turn the
handle of the jack clockwise until the wheel
is completely off the ground.
To lessen the risk of personal injury, do
not put any part of your body under the
vehicle while changing a tire. Do not start
the engine when your vehicle is on the
jack. The jack is only meant for changing
the tire.
RWARNING
195
Hide quick links:
Advertisement
Table of Contents
