Table of Contents
Advertisement
How to tune radio stations
There are four ways for you to tune in a
particular station. You can manually locate the
station using the "SCAN/TUNE" button,
"SEEK" the station, "SCAN" to the station or
select the station by using the memory buttons,
which you can set to any desired frequency.
These four methods are described below.
Using the "SCAN/TUNE" button to manually
tune
You can change the frequency up or down
one increment at a time (FM changes in
increments of 200kHz; AM changes in
increments of 10kHz) by first pressing the
"SCAN/TUNE" button twice (display shows
"TUNE"), then — within approximately five
seconds —pressing and releasing either the
top a or bottom b half of the "SEEK"
button. To change frequencies quickly, press
and hold down either the top or bottom half
of the "SEEK" button. While you are
manually tuning, the display will show a
blinking "M".
Manual tuning adjusts your radio to any
allowable broadcast frequency, whether or
not a station is present on that frequency.
(See All About Radio Frequencies in this
section.)
Using the "SEEK" function
This feature on your radio allows you to
automatically select listenable stations up or
down the frequency band. Press the top a
half of the "SEEK" button to select the next
listenable station up the frequency band.
Press the bottom b half of the button to
select the next listenable station down the
frequency band. By pressing and holding the
button, listenable stations can be passed over
to reach the desired station.
133
Hide quick links:
Advertisement
Table of Contents
