Table of Contents
Advertisement
How to store the tape
Press the "AM/FM" button to stop the tape
player and resume radio play. The cassette will
be stored in the tape player and the X symbol
in the display will be lit until you push the
"PLAY PROG" button to resume tape play. Fast
forward and fast rewind can be used while the
tape is in storage mode without interrupting
radio play.
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. "Dolby" and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
Push the k button to activate Dolby B Noise
Reduction. Push again to deactivate.
Tape error messages
Your cassette tape player is equipped to
diagnose certain problems you may experience.
Error codes are as follows:
Error 0 — Communication error between the
radio controller and the tape controller. The
cassette player will eject the tape. Insert the tape
again. If the same error code appears, turn the
ignition off, then back on again and insert the
tape.
Error 1 — Possible problem cartridge. The
cassette tape player will eject the tape. Insert the
tape again. If the same error code appears in the
display, try a different cartridge.
159
Hide quick links:
Advertisement
Table of Contents
