Product Description
TB20
Primary 50W
Speaker Circuit
TB24
External Operator
Interface Power
TB17
Aux. Power
TB19
NAC Circuit
TB23
Speaker Volume
Control Override
1.2.2 Display Board
External Audio Input - TB5, Terminals 1(-), 2 (+)
Input Impedance: 8.5KΩ, nominal @ 1 KHz
Input Voltage: 700 mV
Input Current: 0.1 mA, maximum @ 700 mV
Background Music Input Voltage (Non-Canadian applications): 225mV
NOTE: Some laptops/personal computers only provide an audio output for headphones. It may be necessary to adjust the headphone
output level for proper recording of voice messages.
1.2.3 NFC-CE6 Circuit Expander Module
Power-limited (Class 2) circuitry
Up to six (6) circuits on the NFC-CE6 can be wired as Style Y (Class B) or Style Z (Class A).
Normal Operating Voltage for Speaker Circuits: 25 V
(70.0 V
@ 700 mA max. with maximum Load Impedance of 100Ω operation possible for the primary circuit by plugging
RMS
optional NFC-XRM-70V conversion transformer into J12 of the main control board. The same operation is possible for the optional
50W amplifier by selecting the NFC-BDA-70V model.)
Speaker circuit wiring is supervised during standby, background music, and alarm.
Output Power: 50 watts total; Frequency Range: 800 - 2,800 Hz
Maximum total capacitance: 250 µF. (Note that the total capacitance for the speaker outputs must not exceed the maximum of 250 µF).
End-of-Line Resistor required for Style Y (Class B) speaker circuit: 15 KΩ, 1 watt (P/N: ELR-15K)
TB13 on the main control board: ACS/ANN (EIA-485) electrically isolated link to FACP provides programmed speaker control
16
10W max. = 0.66
amps from supply
0.8 amp max.
0.5 amp max.
2.0 amps max.
0.25 amp max.
Figure 1.2 Current Availability - 50 Watt System
maximum
RMS
Primary 50W
Speaker Circuit
External Operator
Interface Power
Aux. Power
Alarm
7.5 amps
max.
maximum
,
RMS
@ 2 amps max. and maximum Load Impedance of 12.5Ω
RMS
Notifier FirstCommand Series Manual — P/N LS10001-001NF-E:H 1/8/2018
Input/Output Circuit Specifications
TB20
10W max. = 0.66
amps from supply
TB24
0.8 amp max.
TB17
0.5 amp max.
Standby
2.0 amps max.
(includes
background
music).