Preparations - Body Solid GLPH1100 Assembly Instructions & Owner's Manual

CAUTION: To set up this unit, you will need assistance.
Do not attempt assembly by yourself.
You must review and follow the instructions in this Owner's Manual. If you do not assemble and use the
GLPH1100 according to these guidelines, you could void the Body-Solid warranty.
Required Tools
The basic tools that you must obtain before assembling
the GLPH1100 include but are not limited to:
m Metric Allen Key Set
m Standard Allen Key Set
m Standard Wrench Set
m Metric Wrench Set
m Adjustable Wrench
m Screwdriver (standard and/or phillips)
m Rubber Mallet
m Silicone Spray Oil
Installation Requirements
Follow these installation requirements when assembling
the GLPH1100:
Set up the GLPH1100 on a solid, flat surface. A smooth,
flat surface under the machine helps keep it level. A
level machine has fewer malfunctions.
Provide ample space around the machine. Open
space around the machine allows for easier access.
Insert all bolts in the same direction. For aesthetic
purposes, insert all bolts in the same direction unless
specified (in text or illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners such as
bolts, nuts, and screws so the unit is stable, but leave
room for adjustments. Do not fully tighten fasteners
until instructed in the assembly steps to do so.
Fill out and mail the warranty card.
P r e p a r a t i o n s
CAUTION:
The GLPH1100 unit comes in five boxes. Be careful to
assemble components in the sequence presented in
this guide.
NOTE:
8
Obtain assistance! Do not attempt to
assemble the GLPH1100 by yourself.
Review the Installation Requirements
before proceeding with the following
steps.
With so many assembled parts, proper
alignment and adjustment is critical. While
tightening the nuts and bolts, be sure to leave
room for adjustments.