Set Baud Rate
The Set Baud Rate command allows you to configure the baud rate setting for
the serial port connection. The default baud rate is 19200.
Use the Formula - to set Parameters - to create a Command.
Formula:
Command + Control + [Enter]
Parameters:
Set Baud Rate Commands
Some available formulas for the Set Baud Rate commands are as follows:
1. Command + Control + [Enter]
For example, to set the baud rate to 19200, type the following:
baud 19200 [Enter]
Command
baud
Baud Rate Command
Control
19200
Set baud rate to 19200 (Default)
38400
Set baud rate to 38400
9600
Set baud rate to 9600
Enter
Enter
Enter and send out command
Chapter 6. RS-232 Operation
Description
Description
Description
41