Table of Contents
Advertisement
ACPI Aware O/S
Enable this item if you are using an O/S that
supports ACPI function such as Windows 98/ME /
2000.
Power
Use this item to select a power management
scheme. Both APM and ACPI are supported.
Management
Suspend Time Out
This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter power-
saving Suspend mode.
Hard Disk Time
This sets the timeout to power down the hard disk
drive, if the time selected passes without any hard
Out
disk activity.
Resume On RTC
The system can be turned off with a software
command. If you enable this item, the system can
Alarm Date / Hour /
automatically resume at a fixed time based on the
Minute / Second
system's RTC (realtime clock). Use the items
below this one to set the date and time of the
wake-up alarm. You must use an ATX power
supply in order to use this feature.
LAN/Ring Power
The system can be turned off with a software
command. If you enable this item, the system can
On
automatically resume if there is an incoming call
on the Modem. You must use an ATX power
supply in order to use this feature.
KeyBoard Power
If you enable this item, you can turn the system on
and off by pressing hot keys on the keyboard. You
On
must enable the Keyboard Power On jumper and
use an ATX power supply in order to use this
feature.
3: BIOS Setup Utility
29
Advertisement
Table of Contents
