Serial Configuration (For Port 0 And Port 1) - NetBurner SB72EX User Manual

Serial Configuration (for Port 0 and Port 1)

Click the Serial link at the top of the page to view the Serial page. When you are finished, remember to
click the Submit New Settings button to save your changes. Note: If you are only using one port, you can
ignore the other port's section.
Select the appropriate Data Port Setting from the drop down menu. Remember, Port 1 is permanently
configured as a RS-232 port.
Select the appropriate Data Baud Rate from the drop down menu. Your host computer and your attached
SB72EX must agree on a speed or baud rate to use for the serial connection. The factory default is 115200.
SB72EX User's Manual, 350030-001 Page 10
Downloaded from Elcodis.com electronic components distributor