Device Connection Settings (Tcp Mode) - NetBurner SB72EX User Manual

Device Connection Settings (TCP mode)

This is the bottom section of the first page that you will see when your web browser opens.
Your choices (for Port 0 and Port 1) for "When to begin making outgoing serial connections:" are:
When you are finished with this section, click the appropriate button at the bottom of the page. Submit
New Settings will save your settings, and Reset to Factory Defaults will restore the factory values. Next,
click on the Advanced Serial Settings link to enter your serial notification information. Remember, if you
are only using one port, you can ignore the other port's section. Note: For the telnet example on page 19,
the Listening network port number for Port 1 is 24 (the default setting).
To view the Advanced Serial Settings screen click on its link on the bottom of this page.
SB72EX User's Manual, 350030-001 Page 7
Downloaded from Elcodis.com electronic components distributor