Advanced Serial Data Port Settings (For Both Port 0 And Port 1) - NetBurner SB72EX User Manual

Advanced Serial Data Port Settings (for both Port 0 and Port 1)

If you want to have a message displayed in the MTTTY window (or HyperTerminal) when your TCP
connection (e.g. telnet) is established or lost, enter it in this section. Remember to check the appropriate
box and click the Submit New Settings button to save your settings. The message formatting codes are
listed below.
When finished viewing message formatting codes, click the Return to Setup Page button to return to your
Advanced Serial web page. Note: If you are only using one port, you can ignore the other port's section.
SB72EX User's Manual, 350030-001 Page 8
Downloaded from Elcodis.com electronic components distributor