Overview Of The Sb72Ex Dual-Port Serial To Ethernet Device; Configuration - NetBurner SB72EX User Manual

Overview of the SB72EX Dual-port Serial to Ethernet Device

The NetBurner SB72EX Dual-port Serial to Ethernet device comes preprogrammed and ready to run on
your network. The SB72EX is programmed to convert RS-232, RS-422, RS-485, and TTL data to Ethernet,
enabling communication with your serial device over a network or on the Internet. The onboard web server
provides easy device configuration using a standard web browser.
Front view of the SB72EX, showing the power
input jack, power-on LED, and the Ethernet RJ-45
connector.

Configuration

Before you can begin using your SB72EX, three areas of configuration are required:
You will need to tell your SB72EX what type of serial interface you want to use, the network address you
want your SB72EX to respond to, the serial data baud rate, and the TCP/IP listening port number.
SB72EX User's Manual, 350030-001
Downloaded from Elcodis.com electronic components distributor
1. Hardware configuration
2. Network configuration
3. Operational configuration
Rear view of the SB72EX, showing the two RS-232
(default configuration) serial ports. Port 0 is on the
left; Port 1 is on the right.
Page 3