Download
Share
Print this page
Bauer 1967E-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Power Tool
  5. 1967E-B
  6. Owner's manual & safety instructions

Bauer 1967E-B Owner's Manual & Safety Instructions

Variable speed precision crafting rotary tool
Hide thumbs Also See for 1967E-B:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20e

Advertisement

loading

Related Manuals for Bauer 1967E-B

Summary of Contents for Bauer 1967E-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    table of contents Safety ............2 Maintenance ..........11 Specifications ..........9 Parts List and Diagram ......13 Setup ............9 Warranty ............ 15 Operation ........... 10 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Safety

    Electrical Safety 1. power tool plugs must match the outlet. 4. Do not abuse the cord. never use the cord never modify the plug in any way. for carrying, pulling or unplugging the power Do not use any adapter plugs with grounded tool.
  • Page 4 Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Safety Warnings common for Sanding, Wire Brushing, polishing, carving Or abrasive cutting-Off Operations 1.
  • Page 5 15. after changing the bits or making any 23. Do not leave the tool unattended when it is plugged adjustments, make sure the collet nut, chuck into an electrical outlet. Turn off the tool, and or any other adjustment devices are securely unplug it from its electrical outlet before leaving.
  • Page 6 Safety Warnings Specific For abrasive cutting-Off Operations 1. use only wheel types that are recommended 3. Do not “jam” a cut-off wheel or apply for your power tool and only for recommended excessive pressure. Do not attempt to make applications. For example: do not grind with the an excessive depth of cut.
  • Page 7 Grounding tO prEVEnt ELEctric SHOcK anD DEatH FrOM incOrrEct GrOunDinG WirE cOnnEctiOn: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug.
  • Page 8 Extension cords 1. Grounded tools require a three 7. Make sure the extension cord is properly wired wire extension cord. Double Insulated tools can and in good electrical condition. Always replace use either a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 9: Specifications

    Specifications Electrical Rating 120VAC / 60Hz / .08A No Load Speed 4,000 - 20,000 RPM Arbor Size 1/8″ Setup - Before use: read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 10: Operation

    Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 11: Maintenance

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 12 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.

  • Page 13: Parts List And Diagram

    parts List and Diagram part Description Qty. part Description Qty. Collet Nut PCBA Collet Shrapnel Spindle Self-Lock Pin Bearing Lock Button Self-Lock Block Left Housing Fan Blade Power Button Motor Right Housing Sponge Mat Screw Item 57001 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797.

  • Page 15: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
  • Page 16 26541 agoura road • calabasas, ca 91302 • 1-888-866-5797...