Table of Contents
Advertisement
Using Accessories
Using the Carrying Case
Stowing the camera
Align the camera with the base of the case, and slide
the camera in forward.
Checking that the pin at the rear engages correctly,
push forward until it locks into place.
Notes
• Bring the viewfinder into the horizontal position,
slide it fully rearward and to the left, then fix before
stowing.
• When an optional microphone (ECM-670/672, C-74,
etc.) is attached, loosen the microphone fixing
screws, move the microphone to the lowest position,
and fix before stowing.
Example of fully-stowed carrying case
DXC-D30/D30P Color Video Camera
This can be stored with the following system
component fitted.
• CA-537/537P/327/327P/325A/325AP/325B
Camera Adaptor or DSR-1/1P, PVV-3/3P or
EVV-9000/9000P
• DXF-701/701CE Viewfinder
• ECM-670/ECM-672/C-74 Microphone
• Zoom lens (VCL-916BYA etc.)
(Largest lens which can be stowed is
Canon J18 X 8.5BI-B.)
• CAC-12 Microphone Holder
• CAC-4 Chest Pad
VCT-U14 Tripod Adaptor
Fasten straps.
32
Chapter 2 Fitting and Connections
Cassettes, camera cables, etc.
Align the camera with the base of the
carrying case.
Lever
NP-1A/1B Battery Packs
(maximum two) - Fasten straps.
Base
LC-421 Carrying
Case
Advertisement
Table of Contents
