Table of Contents
Advertisement
Viewfinder Normal Indications
@¡ Voltage/error indication
The current voltage is displayed whenever the camera
head's power supply voltage dips below 11.0 V DC.
However, you can also display the current voltage at
any time by pressing and holding the MENU/STATUS
switch in the upward position (the display is shown for
as long as you hold the switch upward).
An error message is displayed when an abnormality
has been detected by the auto diagnostic function
(page 51). If there is a voltage drop below 11.0 V DC
and an error has been detected, the low voltage
indication alternates at one-second intervals with the
error indication.
If an error message appears, contact your Sony dealer.
If using a VTR and an Anton Bauer Intelligent
Battery System
The remaining battery capacity is shown as a
percentage.
@™ Shutter setting indication
When the SHUTTER switch has been set to ON, the
shutter speed or CLS frequency set in basic menu page
2 is displayed here.
50
Chapter 4 Viewfinder Screen Indications and Menus
Status Indications
If you set the MENU/STATUS switch to STATUS
while a menu is being displayed, the camera head's
current setting status will be shown in this display
area.
W
H
I
T
E
: A U T O / A
A
.
I
R S : S T D
I
F
I
L
E
: S T D
D
C
C
+
: O F F
S
S
:
O F F
a) When both the DCC+ and DynaLatitude
functions are set to OFF
Display
Description
WHITE
White balance adjustment method
selection (PRE/A/B) and color
temperature during auto white
balance adjustment
A.IRIS
Iris adjustment method selection
(STD/SPOT L/BACK L)
FILE
STD (when not using the setup files),
or a selected file name (when using
the setup files)
DCC+ or DL
For DCC+ indication: ON with the
OUTPUT/DL/DCC+ switch set to
CAM/DCC+ (DCC+ ON), and OFF
with the switch set to CAM/DL and DL
in advanced menu page 2 (page 57)
set to OFF (both DCC+ and
DynaLatitude OFF).
For DL indication: When setting the
OUTPUT/DL/DCC+ switch to DL and
DL in advanced menu page 2 to OFF
(DynaLatitude OFF), LOW, STD or
HIGH is displayed according to DL
LVL setting in basic menu page 3
(page 52).
a)
B A T T :
1 3 . 0 V
Advertisement
Table of Contents
