Table of Contents
Advertisement
Using Accessories
Using the LC-421 Carrying Case
Stowing the camera
Turn the eyepiece downwards. Then, align the camera
with the base of the case, and slide the camera in
forward.
Checking that the pin at the rear engages correctly,
push forward until it locks into place.
Notes
• Turn the eyepiece of the viewfinder downwards, slide
the viewfinder fully rearward and to the left, then
secure it in place before stowing.
• When an optional microphone (ECM-670/672, C-74,
etc.) is attached, loosen the microphone fixing
screws, move the microphone to the lowest position,
and fix before stowing.
Example of fully-stowed carrying case
DXC-D50/D50P/D50WS/D50WSP Color Video Camera
This can be stored with the following system
component fitted.
• CA-D50/D50P/TX7/TX7P Camera Adaptor
or DSR-1/1P, PVV-3/3P Videocassette
Recorder
• DXF-801/801CE Viewfinder
• ECM-670/ECM-672/C-74 Microphone
• Zoom lens (VCL-919BY, etc.)
• CAC-12 Microphone Holder
VCT-U14 Tripod Adaptor
Fasten straps.
34
Chapter 2 Fitting and Connections
Cassettes, camera cables, etc.
Align the camera with the base of the
carrying case.
Lever
Base
LC-421 Carrying
Case
Advertisement
Table of Contents
