Panasonic TH-65SQ1W Operating Instructions Manual page 94

3
Hash the following data with the MD5 algorithm, and
generate a 32-byte hash value.
[zzzzzzzzyyyyy]
zzzzzzzz :
8-byte random number obtained in step 2
yyyyy :
Password of the WEB control administrator
privileges user
●
Default user name and password are as follows:
User name: dispadmin
Password: @Panasonic
Command transmission method
Transmit in the following command format
Transmitted data
Control
Header
symbol
Hash value
(STX)
(see
"Connection 0x02
method")
32 bytes 1 byte
Received data
Control
Data part
symbol
Control
command
(STX)
(ASCII
0x02
character
string)
1 byte Undefined
94
English
Last
Control
Data part terminal
symbol
symbol
Control
command
(ETX) (CR)
(ASCII
0x03 0x0d
character
string)
Undefined 1 byte 1 byte
Last
Control
terminal
symbol
symbol
(ETX) (CR)
0x03 0x0d
1 byte 1 byte
Error response
Error message
"ERR1" : Undefined control
command
"ERR2" : Out of parameter range
"ERR3" : Busy status or reception
invalid period
"ERR4" : Timeout or reception
invalid period
"ERR5" : Wrong data length
"PDPCONTROL : Mismatching of
ERRA" password
4 bytes or 15 bytes
■
When the WEB control administrator
privileges password has not been set (Non-
protect mode)
Connection method
1
Obtain the display's IP address and the port number
(Default is 1024), and request connection to the
display.
The IP address and the port number can be obtained
from the following menus.
IP address:
•
[Setup] → [Network settings] → [LAN setup] or
[Network status]
Port number:
•
[Setup] → [Network settings] → [LAN setup]
●
For more detail of the settings, see page 78.
2
The display responds.
Response data
Data part Space
[PDPCONTROL]
[ ]
(ASCII
character 0x20
string)
10 bytes 1 byte
Mode: 0 = Non-protect mode
Last
terminal
symbol
(CR)
0x0d
1 byte
Last
Mode terminal
symbol
[0] (CR)
0x30 0x0d
1 byte 1 byte