Panasonic TH-65SQ1W Operating Instructions Manual page 122

Note
● The operations of the single playback mode and the
synchronized playback mode are different from those
of Single Media Player and Multi Media Player of the
existing USB media player.
●
For playback in the synchronized playback mode,
approx. 5 seconds of preparation time are added in
switching content.
●
To perform the synchronized playback with multiple
displays, set the [Synchronize display] function to
[On], and set the same time for all the displays for
playback.
● If the time is not synchronized correctly with
[Synchronize display] set to [On], the unit may not
operate properly. Confirm the operation conditions of
[Synchronize display]. (see page 76)
●
If [Multi display settings] - [Multi screen display]
is specified in the schedule data of "Content
Management Software", the setting is switched to
the specified multi screen display. The setting of
[Multi screen display] cannot be changed during the
specified schedule playback. When the specified
schedule has finished, the setting of [Multi screen
display] is restored to the state before setting.
■
Caption display
A caption is displayed at the time set for the schedule
data.
Note
●
The caption is displayed on top of an image.
● A maximum of 600 characters can be displayed with
caption.
● Scrolling of the caption may stop at switching timing
of content playback or music playback.
● The caption is hidden by switching input. If the input
is switched with the schedule playback function, the
caption display continues.
Also, if the schedule playback function is resumed,
the caption is displayed from the beginning.
●
Changing the settings of [OSD language], [Display
orientation] or [Image rotation], or displaying the
display ID/display name will delete the caption being
displayed.
●
When creating schedule data, if a caption with many
characters is displayed with [Scroll] set to [No], the
characters will run over on the screen.
● The caption does not synchronize with other displays
even if [Play mode] is [Synchronize play].
122
English
■
Disabled functions
The following main unit's functions are set to [Disable
(Off)] during schedule play mode.
● [Set up timer]
●
[Screensaver]
●
"Power management" function
●
[No signal power off]
●
[HDMI-CEC settings]
● [No activity power off]
● [OSD transparency]
●
[Image settings] (Reading user image is disabled.)
●
[Input search]
●
[Initial input]
●
[Input lock]
● [Failover/Failback]
Note
● Disabled functions are greyed out on the on-screen
menu. Also, serial commands are in [ER401] state
(Including the inquiry command).
●
During schedule play mode, disabled functions
are set to [Disable (Off)], and those operations are
forcibly stopped.
●
When schedule play mode has finished, the disabled
functions are restored to the original setting values.
●
For [Multi display settings] – [Multi screen display],
only [Horizontal scale], [Vertical scale] and [Location]
can be set. [Bezel H adjustment] and [Bezel V
adjustment] cannot be set.
● [Multi display settings] – [Multi input display] cannot
be set to [On] during schedule play mode. Also,
[Schedule play function] cannot be set to [Enable]
when [Multi display settings] – [Multi input display] is
set to [On].
■
Resume play
Sets the operation when the schedule playback is
restored again after schedule play mode is stopped
once.
When set to [On]:
The previous content before schedule play mode is
stopped is played back from the beginning.
When set to [Off]:
The playlist scheduled to be played back at the
current time is played back from the beginning.
Note
●
When playback is scheduled in the synchronized
playback mode, the playback is performed according
to the set time in both [On] and [Off] cases.