Panasonic TH-65SQ1W Operating Instructions Manual page 60

When PC is selected
Signal
Component/RGB-in select
Sync
Cinema reality
Noise reduction
MPEG noise reduction
Input resolution
Input level
Frame creation
Dynamic backlight control
H-freq.
V-freq.
Dot clock freq.
Signal format
When Screen Transfer is selected
Signal
Noise reduction
MPEG noise reduction
When USB / MEMORY VIEWER is selected
Signal
Noise reduction
MPEG noise reduction
Frame creation
Note
● [Signal] setup menu displays a different setting
condition for each input signal.
● Menu that cannot be adjusted is greyed out.
■
[Component/RGB-in select]
This menu is displayed at PC signal input.
Select to match the signals from the source
connected to PC IN terminal.
[Component]:
YP P /YC C
B R B R
[RGB]:
RGB signals
■
[YUV/RGB-in select]
This menu is displayed at HDMI 1, HDMI 2,
DisplayPort, DIGITAL LINK, DVI-D IN and SLOT
inputs.
Select to match the signals from the source
connected to each terminal.
[Auto]:
YUV/RGB setting is automatically switched.
[YUV]:
YUV signals
[RGB]:
RGB signals
Note
●
Set for each input terminal (HDMI 1, HDMI 2,
DisplayPort, DIGITAL LINK, DVI-D IN, SLOT).
●
With DIGITAL LINK input, it is possible to set to
[YUV] and [RGB] only. It cannot be set to [Auto].
60
English
RGB
Auto
Off
Auto
Off
Auto
0
Off
Off
74.04 kHz
59.95 Hz
154.00 MHz
1920x1200/60
Auto
Off
Auto
Off
Off
signals
■
[Sync]
This menu is displayed at PC IN input.
Setting RGB/PC sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected.
When displaying CS signal, connect to HD input
terminal.
[on G]:
Uses a synchronized signal on the Video G
signal, which is input from the G connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
Setting Component sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected.
When displaying CS signal, connect to HD input
terminal.
[on Y]:
Uses a synchronized signal on the Video Y
signal, which is input from the Y connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
■
[Cinema reality]
Faithfully reproduces videos shot with cinema films.
Set this to [Off] normally.
Note
● In [ENGLISH(US)] OSD language, [Cinema reality]
is displayed as [3:2 PULLDOWN].
● If [Cinema reality] is set to [On], videos including
movies shot at 24 frames per second are
reproduced more naturally.
● If the video is unnatural with [On] set, set it to [Off].
■
[Noise reduction]
Reduces picture noise.
[Off]:
Disables [Noise reduction].
[Min], [Mid], [Max]:
Sets strength of [Noise reduction].
[Auto]:
[Noise reduction] will be automatically selected
from [Min], [Mid] or [Max].
■
[MPEG noise reduction]
Reduces block noise and mosquito noise on MPEG
videos.
[Off]:
Disables [MPEG noise reduction].
[Min], [Mid], [Max]:
Sets strength of [MPEG noise reduction].