Panasonic TH-65SQ1W Operating Instructions Manual page 79

[Password]
Enter the password for authentication with one-byte
alphanumeric characters. (Up to 64 characters)
This can be set only when [EAP] is set to items other
than [None] or [EAP-TLS].
Note
● [EAP], [User name] and [Password] are the functions
for 65/55/49-inch models. They are not displayed for
98/86-inch models.
●
When EAP is used, this unit needs to be configured
according to the settings of the RADIUS server.
For the settings of the RADIUS server, consult with
the network administrator.
●
When [EAP] is set to [EAP-TLS], set [Date and time]
(see page 76) and register the certificate on the WEB
browser control. (see page 103)
[MAC address]
Displays the MAC address of this unit.
■
[Network status]
Checks the current Network settings status.
Network status
DHCP
IP address
192. 168. 0. 8
Subnet mask 255. 255. 255. 0
Gateway 192. 168. 0. 1
EAP
MAC address 12:34:56:78:9A:BC
Note
●
[EAP] is a function for 65/55/49-inch models. It is not
displayed for 98/86-inch models.
Off
None
■
[DIGITAL LINK mode]
Switches communication method of DIGITAL LINK
terminal.
[Auto]:
Communication method is selected automatically.
HDMI, LAN, serial communication are possible.
Ethernet connection is possible.
[DIGITAL LINK]:
HDMI, LAN, serial communication are possible via a
twisted pair cable transmitter.
[Ethernet]:
LAN communication is possible via the LAN terminal
of the display.
[Long reach]:
Communication method is fixed to Long reach.
Modes allowing communication
: Valid
― : Invalid
Settings
transmission Ethernet
100 m 150 m
For
DIGITAL
LINK
Auto For Long
reach
For
Ethernet
DIGITAL LINK
Long reach
Ethernet
Note
● When connected with the [Long reach]
communication method, the maximum
transmission distance is 150 m. In this case, this
unit can receive the signals of up to 1080/60p
(148.5 MHz).
●
If the communication method of the twisted
pair cable transmitter is set to [Long reach], set
[DIGITAL LINK mode] to [Auto]. Then, connection
is enabled with the [Long reach] communication
method.
When connecting with the separately sold DIGITAL
LINK Switcher (ET-YFB200G) with the [Long
reach] communication method, set [DIGITAL LINK
mode] to [Long reach].
●
Even if [DIGITAL LINK mode] is set to [Long
reach], when the twisted pair cable transmitter
does not support the communication method of
[Long reach], it will not be connected properly.
Communication validity
Picture
―
―
― ―
―
―
― ―
English
RS-
232C
―
―
79