Pairing And Connecting With Other Bluetooth Devices - Sony WI-C600N Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WI-C600N

Pairing and connecting with other Bluetooth devices

The operation to register the device that you wish to connect to is called pairing. First, pair a device to use it with the
headset for the first time.
Before you start the pairing operation, make sure that:
The Bluetooth device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Bluetooth device is in hand.
Enter pairing mode on this headset.
1
Turn on the headset when you pair the headset with a device for the first time after you bought it or after you
initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold
the button for about 7 seconds.
Check that the blue indicator repeatedly flashes 2 times in a row. You will hear a voice guidance "Bluetooth pairing".
Perform the pairing procedure on the Bluetooth device to search for this headset.
2
[WI-C600N] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step 1.
Select [WI-C600N] displayed on the screen of the Bluetooth device for pairing.
3
If passkey (*) input is required on the display of the computer, input "0000."
*
A Passkey may be called "Passcode," "PIN code," or "Password."
Make the Bluetooth connection from the Bluetooth device.
4
Some devices automatically connect with the headset when the pairing is complete. You will hear a voice guidance
"Bluetooth connected".
Hint
66