Table of Contents
Advertisement
Help Guide
Wireless Noise Canceling Stereo Headset
WI-C600N
Using the AI noise canceling function
This is a convenient function which provides the most effective noise canceling mode by immediately analyzing the
ambient sound components. In particular, use this function if you feel that you are not receiving the full effect of the noise
canceling function when moving and the ambient noise changes significantly.
Press and hold the NC/AMBIENT button with the power turned on until you hear a sound from the headset
1
which announces the start of the analysis (about two seconds).
The analysis of the ambient sound begins (about 3 seconds). The music volume decreases during music playback.
When the analysis finishes, it automatically switches to the optimal noise canceling mode, and the music volume
returns to normal.
Noise canceling mode types
NC Mode A:
Suitable for noise that contains a lot of mid-low range sounds. Effective for generally noisy environments.
NC Mode B:
Suitable for noise that contains a lot of very low range sounds. Mainly effective for noise on buses and trains.
NC Mode C:
Suitable for relatively quiet and wide-range noise. Mainly effective for office and office equipment noise.
Note
The noise canceling mode returns to NC Mode A when:
the noise canceling function is turned off, then turned on again.
the headset is turned off, then turned on again.
4-739-218-11(1) Copyright 2018 Sony Corporation
83
Advertisement
Table of Contents
