Pairing And Connecting With Other Bluetooth Devices - Sony WI-C300 Help Manual

Help Guide
Wireless Stereo Headset
WI-C300

Pairing and connecting with other Bluetooth devices

Pairing is the process required to create a link between Bluetooth devices to allow wireless connection. You must pair a
device with the headset to be able to make a Bluetooth connection for the first time.
Before you start the pairing operation, make sure that:
The Bluetooth device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Bluetooth device is in hand.
Enter pairing mode on this headset.
1
Turn on the headset when you pair the headset with a device for the first time after you bought it or after you
initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold
the button for about 7 seconds.
Make sure that the indicator flashes blue and red alternately after you release the button. You will hear a voice
guidance "BLUETOOTH pairing".
Perform the pairing procedure on the Bluetooth device to search for this headset.
2
[WI-C300] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step 1.
Select [WI-C300] displayed on the screen of the [Bluetooth] device for pairing.
3
If passkey (*) input is required on the display of the computer, input "0000."
*
A Passkey may be called "Passcode," "PIN code," or "Password."
Make the Bluetooth connection from the Bluetooth device.
4
Depending on the Bluetooth device, the headset may be connected with the device automatically as soon as they
are paired. When connected, you will hear a voice guidance "BLUETOOTH connected".
54