Sony WI-C600N Help Manual page 30

Touch [WI-C600N].
4
You will hear a voice guidance "Bluetooth connected".
Hint
The above procedure is an example. For more details, refer to the operating instructions supplied with your Android smartphone.
If the smartphone was connected with the headset the last time, an HFP/HSP connection is established when you turn on the
headset. Press the
Note
When connecting, either [WI-C600N] or [LE_WI-C600N] or both are displayed on the connecting device. If both or [WI-C600N]
are displayed touch [WI-C600N], or touch [LE_WI-C600N] if [LE_WI-C600N] is displayed.
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. In that case, deactivate the Bluetooth function on the device or turn off the power.
If you cannot connect your smartphone to the headset, delete the headset pairing information on your smartphone and perform
the pairing again. As for the operations on your smartphone, refer to the operating instructions supplied with your smartphone.
Related Topic
How to make a wireless connection to Bluetooth devices
Pairing and connecting with an Android smartphone
Listening to music from a device via Bluetooth connection
button while the headset is turned on to switch to a music playback connection (A2DP).
4-739-218-11(1) Copyright 2018 Sony Corporation
30