Sony WI-C600N Help Manual page 39

Wireless noise canceling stereo headset

Table of Contents

Touch [WI-C600N].

You will hear a voice guidance "Bluetooth connected".

Hint

The above procedure is an example. For more details, refer to the operating instructions supplied with your iPhone.

If the iPhone was connected with the headset the last time, an HFP/HSP connection is established when you turn on the headset.

Press the

button while the headset is turned on to switch to a music playback connection (A2DP).

Note

When connecting, either [WI-C600N] or [LE_WI-C600N] or both are displayed on the connecting device. If both or [WI-C600N]

are displayed touch [WI-C600N], or touch [LE_WI-C600N] if [LE_WI-C600N] is displayed.

If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply

turning on the headset. In that case, deactivate the Bluetooth function on the device or turn off the power.

If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform the pairing

again. As for the operations on your iPhone, refer to the operating instructions supplied with your iPhone.