Errors
The door cannot be opened.
The water is not draining.
Water is not flowing in. Deter-
gent is not being dispensed.
Cause
is activated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain hose
is caught or jammed.
Drain pump is blocked.
is activated.
The water outlet hose is con-
nected too high.
You have not pressed Start /
Reload
.
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is kinked
or jammed.
Troubleshooting en
Troubleshooting
Continue the programme by selecting
▶
Spin or Drain and pressing Start /
Reload
.
→ "Resuming the programme when
the programme status is Rinse Hold",
Page 36
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 36
Start the Drain programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 63
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and water
▶
drain hose are not kinked or trapped.
→ "Cleaning the drain pump",
▶
Page 49
Continue the programme by selecting
▶
Spin or Drain and pressing Start /
Reload
.
→ "Resuming the programme when
the programme status is Rinse Hold",
Page 36
Install the water outlet hose at a max-
▶
imum height of 1 metre.
→ "Technical specifications",
Page 67
Press Start / Reload
▶
Clean the filters in the water inflow
▶
→ Page 52.
Turn on the tap.
▶
Ensure that the water inlet hose is not
▶
kinked or jammed.
.
57