Table of Contents
Advertisement
Press and hold
1.
3 seconds.
a The display shows the basic dosage
set for (Detergent).
To adjust the setting, press - / + .
2.
To end the setting process, wait
3.
briefly.
Note: To adjust the basic dosage for
(Softener), repeat the steps with
i-DOS.
Home Connect
This appliance is network-capable.
Connecting your appliance to a mobile
device lets you control its functions via
the Home Connect app, adjust its basic
settings and monitor its operating
status.
Home Connect services are not avail-
able in every country. The availability of
the Home Connect function depends
on the availability of Home Connect
services in your country. You can find
information about this at: www.home-
connect.com.
Home Connect settings
Overview of Home Connect settings
Below is an overview of the Home Connect settings and network settings.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
i-DOS for approx.
To use Home Connect, first set up a
connection to the WLAN home network
1
(Wi-Fi
) or LAN home network and the
Home Connect app.
There are various ways to connect to
your home network, depending on the
features of your appliance:
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 41
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi) without
WPS function", Page 41
The Home Connect app will guide you
through the entire login process. Follow
the instructions in the Home Connect
app to configure the settings.
Tips
¡ Please consult the Home Connect
documents supplied.
¡ Please also follow the instructions in
the Home Connect app.
Notes
¡ Please note the safety precautions in
this instruction manual and make
sure that they are also observed
when operating the appliance via the
Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible to
operate the appliance using the
Home Connect app.
Home Connect en
39
Advertisement
Table of Contents
