Adjusting The Programme Settings; Loading Laundry; Adding Detergent And Care Product - Bosch WAV28KH9GB User Manual And Installation Instructions

If necessary, adjust the programme
2.
settings → Page 35.
Adjusting the programme set-
tings
Depending on the programme and pro-
gramme progress, you can adjust or
activate/deactivate the settings.
Note: Overview of all programme set-
tings:
→ "Buttons", Page 28
Requirement: A programme has been
set.
Adjust the programme settings.
▶
Note
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.

Loading laundry

Notes
¡ Please read the safety information
→ Page 4 to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of the
maximum load for the relevant pro-
gramme → Page 23.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 31
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it in
3.
the drum.
Note: Ensure that there is no laundry
4.
trapped in the door.
Close the door.
Adding detergent and care
product
For programmes in which intelligent
dosing is not possible or desirable, you
can add detergent to the manual dos-
ing compartment.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain remover,
starch or bleach, to the manual dosing
compartment. Do not add any addi-
tional detergent to the manual dosing
compartment to avoid overdosage
and/or foaming.
Requirement: Find out the optimum
dosage for detergent and care product.
→ Page 32
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.
Basic operation en
35