Table of Contents
Advertisement
[ECO management set up] page
You can make settings for the ECO management function of the projector.
Click [Detailed set up] → [ECO management set up].
1 [LAMP POWER]
Selects the [LAMP POWER] setting.
2 [AUTO POWER SAVE]
Select [ON] to set [AMBIENT LIGHT DETECTION],
[SIGNAL DETECTION], and [AV MUTE DETECTION].
3 [AMBIENT LIGHT DETECTION]
Enable ([ON])/disable ([OFF]) the ambient light
detection function.
4 [SIGNAL DETECTION]
Enable ([ON])/disable ([OFF]) the signal detection
function.
Note
f For detailed description of each setting item, refer to the [PROJECTOR SETUP] menu of the projector → [ECO MANAGEMENT].
(x page 70)
[Change password] page
Click [Change password].
1 [Administrator]
Used to change the setting of [Administrator].
2 [User]
Used to change the setting of [User].
90 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
5 [AV MUTE DETECTION]
6 [POWER MANAGEMENT]
7 [TIMER]
8 [Submit]
3 [Next]
Enable ([ON])/disable ([OFF]) the AV mute detection
function.
Select the power consumption mode.
Select the time that the lamp is turned off when the
POWER MANAGEMENT function is using.
Update the setting.
1
2
3
Used to change the setting of the password.
Advertisement
Table of Contents
