Table of Contents
Advertisement
Note
f The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the <FUNCTION> button.
[FILTER COUNTER]
This function is used to reset the filter use time and set the notification display.
1)
Press as to select [FILTER COUNTER].
2)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER RESET]
Setting [TIMER]
1)
Press as to select [TIMER].
2)
Press qw to switch the setting of the timer.
f The items will switch each time you press the button.
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H] → [7000 H]
[FILTER COUNTER RESET]
1)
Press as to select [FILTER COUNTER RESET].
2)
Press the <ENTER> button.
f The [FILTER COUNTER RESET] screen is displayed.
3)
Press qw to select [OK] and then press the <ENTER> button.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1)
Press as to select [INITIALIZE ALL].
2)
Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
3)
Press qw to select [OK] and then press the <ENTER> button.
f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.
4)
Press the <ENTER> button.
f The operation of other buttons is disabled.
f The initial setting (display language) screen will be displayed when the projector is switched on the next time.
Note
f The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [EMULATE] and the setting values of [NETWORK] cannot be returned to the
factory default values. For details about the initialization of [NETWORK], please refer to [NETWORK] → [INITIALIZE].
(x page 79)
74 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the using time of the filter.
Sets the timer when you want to display an alert message of filter replacement.
Resets the filter counter.
Advertisement
Table of Contents
