Table of Contents
Advertisement
3)
Press as to select [CURVED CORRECTION].
4)
Press the <ENTER> button.
f The [CURVED CORRECTION] screen is displayed.
5)
Press as to select one item to adjust.
[LENS THROW RATIO]
[KEYSTONE]
[ARC]
[BALANCE]
[MAINTAIN ASPECT RATIO]
6)
Press the <ENTER> button.
f The individual adjustment screen of the selected function is displayed.
Adjusting [LENS THROW RATIO]
1)
Press qw to adjust.
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [LENS THROW RATIO]" (x page 55).
Adjusting [KEYSTONE]
1)
Press asqw to adjust.
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [KEYSTONE]" (x page 55).
Adjusting [ARC]
1)
Press asqw to adjust.
Items
Press the q button.
[H]
Press the w button.
Press the a button.
[V]
Press the s button.
Adjusting [BALANCE]
1)
Press qw to adjust.
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [BALANCE]" (x page 56).
Note
f One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE],
[CORNER CORRECTION] or [CURVED CORRECTION] adjustment is finished, you adjust the others, the adjusted value
will be reset.
f Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED
CORRECTION] screen is displaying, it will switch to the next adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next
corner can also be displayed by pressing the <ENTER> button.
Chapter 4 Settings — [POSITION] menu
Set the throw ratio.
Select an approximate value that is the actual projection distance divided by the
projected image width.
Adjusts when the trapezoid of the projected image is distorted.
Adjusts when the radian of the projected image is distorted.
Adjusts according to the lens shift range in the horizontal or vertical direction.
Set to [ON], maintain the aspect ratio when correct the curved distortion of the
projected image.
Operation
The top and the bottom of horizontal line will
be bulge.
The top and the bottom of horizontal line will
be dent.
The left and the right of vertical line will be
dent.
The left and the right of vertical line will be
bulge.
Adjustment
ENGLISH - 57
Advertisement
Table of Contents
