Introduction; Home Screen; Information Displayed; Occupancy Status - Carrier Infinity SYSTXCCITC01-B Owner's Manual

1. Introduction

CONGRATULATIONS! Your decision to choose the Infinity System puts you in a select
group of homeowners who understand the value of precise comfort control and appreciate the
simplicity of an easy-to-use, intuitive, Control.
Your new Infinity System offers high quality comfort technology. Please take a few moments to
carefully read through this manual. Next set up a comfort profile and schedule that makes sense
for your lifestyle; then relax and enjoy the new comfort of your home!

2. Home Screen

2.1. Information Displayed

NOTE: When you connect your system to the Internet and register on the My Infinity website,
you can access nearly all of the consumer features on the Carrier® Home mobile app. See the
WIRELESS section for more information.
The information displayed on the Home Screen will appear when there has been no interaction
with the Infinity System Control for at least two minutes. The basic information displayed on
the Home Screen consists of the current date and time, the room temperature (zone temperature
if applicable), the outdoor temperature (if available, contact your installing dealer for details),
occupancy sensing status and current weather condition. (Wi-Fi® models only, when properly
configured). Connectivity status to the home Wi-Fi network and the MyInfinity Server will also
be displayed on the Home Screen. Note: You must have Wi-Fi enabled for the indicator to
appear.
If you have uploaded a photo to the Control (see page 40), it will be displayed until you touch
the display. You will then be taken to the Home Screen.

2.2. Occupancy Status

When the occupancy sensing feature is enabled, a dot (occupancy sensing indicator) next to the
zone name is shown to indicate if the room is sensed to be occupied. When no movement is
detected, Occupancy Status indicator stays GRAY. When movement is detected, but the system
hasn't yet determined that the space is occupied (example, someone is just walking through the
room), Occupancy Status indicator turns BLUE. When the system determines that the space is
occupied, Occupancy Status indicator turns GREEN.
5