Table of Contents
Advertisement
Component Identification
2.5
Component Identification
The following descriptions are for identification,
explanation and locating purposes only.
2.5-1
Boom Angle Indicator
The boom angle indicator is a quick reference for the
operator to determine the boom's angle of elevation in
reference to the horizontal.
Boom
Angle
Indicator
Figure 2-1 Boom Angle Indicator
The angle indicator has degree numbers from -20° to
+80°. The numbers should be visible to operator at all
times. Capacities listed in capacity flip charts are based
on and vary with the boom angle of telehandler.
2.5-2
Operator's Cab
The operator's cab allows vision from all sides and is
equipped with a rollover and falling object protective
structure.
The operator's cab provides a falling
object protection structure (FOPS) and
a rollover protection structure (ROPS).
Do not make any modification to this
structure. If damaged, the cab cannot be
repaired. It must be replaced.
A fully-enclosed cab with windows and door is
available as an option. Included in this option is the
windshield wiper, interior light and air heater/defroster.
Air conditioner is also available as an option for fully
enclosed cab.
The operator's seat is equipped with a seat belt. Use
this seat belt at all times when operating the telehandler.
Page 20
WARNING
Height
Adjustment
Seat
The telehandler seat is equipped with devices which
allow for the adjustment of seat height and distance
from the controls. Adjust the seat so that foot pedals,
steering wheel and instrument panel controls are within
easy reach of the operator.
The height adjustment is located on the front side of
the seat and is operated by turning the rotary knob.
Clockwise rotation lowers the seat, counter clockwise
raises the seat.
The ride control is located on the left of the seat and
is also operated by means of a rotary knob. Clockwise
rotation decreases the firmness while counterclockwise
rotation increases the firmness.
The fore and aft lock lever is located on the front-left
corner of the seat. Pushing the lever to the left unlocks
the seat, allowing fore and aft adjustment.
The seat belt must be worn at all times.
Manual Storage Box
T h i s w e a t h e r- r e s i s t a n t b o x
is mounted at the back of the
operator's seat. It contains
operating manual and other
important documentation. The
operating manual for this make and
model of telehandler must remain
with the telehandler and should be
stored in this box.
December 2007
Section 2 - Operation
Fore/Aft
Lock Lever
Figure 2-2 Telehandler Seat
WARNING
Seat belt
Ride Control
Adjustment
ZZ
12362 8AE
ZB2044
Advertisement
Table of Contents
