Reading The Alarms - Electrolux EWM09 Service Manual

4.2

Reading the alarms

The last three alarms stored in the FLASH memory of the PCB can be displayed:
•
Enter the diagnostic mode.
•
Irrespective of the type of circuit board and configuration, turn the programme
selector knob clockwise to the tenth position and this will display the last alarm.
•
To display previous alarms, press the button to the left of the START/PAUSE
button in sequence (as shown in the figure).
•
To return to the last alarm, press the START/PAUSE button.
Technical Support - A.D.L. 02 / 2011 12/24 599 74 08-64