Chevrolet 2002 Astro Owner's Manual page 232

CAUTION:
Fans or other moving engine parts can injure you
badly. Keep your hands away from moving parts
once the engine is running.
5. Check that the jumper cables don't have loose or
missing insulation. If they do, you could get a shock.
The vehicles could be damaged too.
Before you connect the cables, here are some basic
things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal if
the vehicle has one. Negative (
unpainted metal engine part, or to a negative (
terminal if the vehicle has one.
Don't connect positive (+) to negative (
get a short that would damage the battery and maybe
other parts, too. And don't connect the negative (
cable to the negative (
because this can cause sparks.
-
) will go to a heavy,
-
)
-
) or you'll
-
) terminal on the dead battery
-
)
6. Connect the red
positive (+) cable to the
positive (+) terminal of
the vehicle with the dead
battery. Use a remote
positive (+) terminal if
the vehicle has one.
7. Don't let the other end
touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal if
the vehicle has one.
5-5