Operation - Toa RS-410EC e Operating Instructions Manual

7. OPERATION

7.1. Calling
7.1.1. Emergency calls
Step 1 Smash the pane.
Step 2 Push the red button.
Then the button blinks
Step 3 After the called party responds the push button lights
and the emergency conversation can start.
Notes
The RS-410EC e processes one call at a time. Further pressing of a button
does not direct the call to another station. After the call has been proceeded
and finished a new call can be processed.
A smashed pane is to be replaced by a new pane (spare part).
7.1.2. Standard calls
The pre-programmed master station can be called by pressing
the lower station's call button.
Note
The master station to call to has been programmed (See page 8).
Programming can be performed by the N-8000 software program.
5
Push the button
Talk when the button lights
Duplex conversations
Push the button
Talk after the attention tone
Duplex conversations