Basic Scanning Operations Using the Ridoc Desk 2000 Lt
Functions of the TWAIN Driver
Following is an introduction to the various functions of the TWAIN Driver.
Reference
For more details about each function or other functions, see the Help file.
TWAIN Driver Functions
3
Automatic Tilt Correction
This function automatically corrects character strings that were scanned
slanted.
Note
This function is only valid when [Color / Gradation] on the [Picture Quality] tab
of the scanner control dialog box has been set to [Binary]. In this case the
correction will not be reflected in the preview.
Printing to the Image
This function allows you to imprint dates, page numbers or your favorite
characters to a scanned image. You can also change the fonts of the imprints,
as well as the numerical order of the scanned images, whether it is ascending
or descending.
Scanning Mode Registration
This function allows you to register other scanning configurations that are of-
ten used as scanning modes besides the already pre-installed ones. After the
registration, you can scan immediately with the scanning configurations.
The general configurations that come with the pre-installed scanning modes
are quite sufficient, however, except for these, you can add and remove other
scanning modes.
20
7,19