Table of Contents
Advertisement
Basic Scanning Operations Using the Ridoc Desk 2000 Lt
Scanning Originals
Here the operations for scanning images from the scanner using the Ridoc Desk
2000 Lt are explained. When the application you are using is not TWAIN com-
patible, perform scanning using the Ridoc Desk 2000 Lt.
Note
By pressing the {F1} key on the keyboard of the PC during the use of the
Ridoc Desk 2000 Lt, the Help file appears.
3
Scanning Originals
Here, the method for scanning single original is explained on P.15 "Flow of Orig-
inal Scanning Operations".
A
Start up the Ridoc Desk 2000 Lt and select the driver of the scanner.
A Click [Start], point to [Program], and then click [RICOH Ridoc Desk 2000]
from [Ridoc Desk 2000].
Ridoc Desk 2000 Lt starts up.
B From the [Tools] menu, click [Scanner Settings].
The [Scanner Settings] dialog box appears.
C Click [Select Scanner].
The [Select Source] dialog box appears.
D Click [RICOH imagio neo 350/450] in the list, then click [Select].
TWAIN Driver is selected as the scanner source.
E Click [OK].
The [Set Scanner] dialog box closes.
B
Set the scanning conditions.
A From the [File] menu, point to [Add Document], and then click [Scan... ].
The Ridoc Desk viewer and the TWAIN Driver start up.
After a short time, the dialog box of the TWAIN Driver that operates the
scanner appears. This dialog box is called scanner control dialog box.
Note
The title bar displays the scanner currently being used. When multiple
scanners are connected, confirm that the indicated scanner name is the
scanner to be used. If the intended scanner is different, continue from
step B. If it is not necessary to change the scanner, continue from step
D.
B Click [Select Scanner].
The [Select Scanner] dialog box appears.
16
7,19
Advertisement
Table of Contents
