Table of Contents
Advertisement
Preparation
Environments
To use TWAIN Driver or Ridoc Desk 2000 Lt, the following hardware and soft-
ware environments are required.
1
Personal Computer
This driver will run with PC/AT compatible devices.
The computer must have a CD-ROM drive. (The driver is provided on a CD-
ROM.)
Limitation
When using Windows NT, the driver does not work with RISC base pro-
cessors (MIPS R series, Alpha AXP, Power PC).
OS
TWAIN Driver: Windows 95/98/Me, Windows 2000 or Windows NT 4.0/
3.51
Ridoc Desk 2000 Lt: Windows 95/98/Me, Windows 2000, Windows NT 4.0
Note
Neither software works with Windows 3.1.
The Ridoc Desk 2000 Lt does not work with Windows NT 3.51.
Memory
Windows 95/98/Me: 16MB or more (48MB or more recommended)
Windows 2000: 20MB or more (64MB or more recommended)
Windows NT 4.0/3.51: 24MB or more (64MB or more recommended)
Display
TWAIN Driver: Requires VGA (640×480) supporting 256 colors or more.
Ridoc Desk 2000 Lt: Required SVGA (800×600) supporting 65,536 colors or
more.
Hard Disk
100MB of hard disk space (100MB or more recommended) are required for
the installation, save and preview image files.
Ethernet Board
It must be compatible with Windows 95/98/Me, Windows 2000 or Windows
NT 4.0/3.51 envroments.
Note
The Ethernet board does not work if it is not recognized in the Windows
95/98/Me, Windows 2000 or Windows NT 4.0/3.51 environments.
Ethernet Cable
Use category 5 STP cabling with an RJ-45 connector.
6
7,19
Advertisement
Table of Contents
