Table of Contents
Advertisement
2. Installing the Scanner
To use the machine as a network scanner, TWAIN Driver is essential.
Note
If you do not have applications that work with TWAIN, it is necessary to also
install the Ridoc Desk 2000 Lt. Please be aware that the Ridoc Desk 2000 does
not work with Windows NT 3.51.
This chapter assumes that the reader has sufficient understanding of the Win-
dows operating system. See the Windows operation manual for details about its
functions and operation.
The ways for installing the scanner driver on your computer vary depending on
your operating system. Follow the procedures described below.
Using Windows 95/98/Me, Windows 2000
or Windows NT 4.0
Install the scanner driver for Windows 95/98/Me, Windows 2000 or Windows
NT 4.0 using the Plug & Play function of the OS. Here examples of Windows 98
are used for the explanations. The basic operations are similar for Windows 95/
Me, Windows 2000, and Windows NT 4.0.
Note
Before installing, make sure that your computer is set up in an environment
that can support the TCP/IP protocol. See the manual that comes with your
computer for details.
Installing the Scanner Drivers by Auto Run
You can install the scanner drivers and utilities, and set them up easily by using
Auto Run.
Follow these steps to install the scanner drivers and utilities on Windows 95/98/
Me, Windows 2000 or Windows NT 4.0.
Limitation
If your system is Windows 2000 or Windows NT 4.0, installing the scanner
drivers by Auto Run requires Administrators permission. When you install
the scanner drivers by Auto Run, log on using an account that has Adminis-
trators permission.
It is not possible to install the scanner drivers and utilities using Autorun in
Windows NT 3.51. For installing in Windows NT 3.51, see P.13 "Using Win-
dows NT 3.51".
Drivers and Utilities
7,19
11
Advertisement
Table of Contents
